Herunterladen Diese Seite drucken

Cleaning The Appliance; Light (Led) - Siemens GS Serie Gebrauchsanleitung

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 5
en

Cleaning the appliance

m
Caution
Do not use abrasive, chloride or acidic
cleaning agents or solvents.
Do not use scouring or abrasive
sponges. The metallic surfaces could
corrode.
Never clean shelves and containers
in the dishwasher. The parts may
become deformed!
Proceed as follows:
1. Before cleaning: Switch off
the appliance.
2. Pull out the mains plug or switch off
the fuse!
3. Take out the food and store in a cool
location.
4. Clean the appliance with a soft cloth,
lukewarm water and a little pH neutral
washing-up liquid. The rinsing water
must not run into the light.
5. Wipe the door seal with clear water
only and then wipe dry thoroughly.
6. After cleaning reconnect and switch
the appliance back on.
7. Put the food back into the appliance.
Interior fittings
All variable parts of the appliance
can be taken out for cleaning.
Taking out the door shelf "EasyLift"
Fig. '
Move door shelf all the way upwards and
take out.
Removing the container
Fig. (
Pull out the container all the way and lift
to detach it.
30
To insert the container, place on
the telescopic rails and push into
the appliance. Attach the container by
pressing it down.
Taking out the partition
Fig. )/A
Pull the partition forwards and lift out.
Fig. )/B
Lift the glass shelf out of the partition.
Remove telescopic rails
Fig. +
1. Pull out the telescopic rail.
2. Push lock in the direction of the arrow.
3. Detach telescopic rail from the rear
pin.
4. Push telescopic rail together, push
backwards above the rear pin
and disengage.
Installing telescopic rails
1. Place the extended telescopic
rail on the front pin.
2. Pull the telescopic rail forwards
slightly until it engages.
3. Place telescopic rail on the rear pin.
4. Push lock backwards.
Removing cover from the door
ventilation
Fig. ,
Lift cover and remove from the door.

Light (LED)

Your appliance features a maintenance-
free LED light.
These lights may be repaired
by customer service or authorised
technicians only.

Quicklinks ausblenden:

Werbung

loading

Diese Anleitung auch für:

N serie