Operation - auna Connect 100 MKII Bedienungsanleitung

EN
48

OPERATION

Main unit operation:
1. Press the Power button for turning on the Internet radio
2. Press and hold the Power button for 2 seconds to switch 'standby'
Remote control operation
1. In standby mode, tap the POWER Button on remote control to turn the
unit ON. The unit will turn on.
2. To turn the unit into standby mode, tap the POWER button on remote
control again.
Adjusting and muting the volume
Turn the Volume dial to increase or decrease the volume.
1. Press the MUTE button on the remote control to mute the unit.
2. Press the MUTE button on the remote control again to resume play.
EQ operation
You can enjoy different EQ sound effect modes.
1. Press and hold the MENU/INFO button on main unit or remote control
and turn and press the NAVIGATE dial to select 'System settings'.
2. Turn and press the NAVIGATE dial to or use the VOL+/VOL- buttons on
the remote control to select the 'Equalizer'.
3. Press the OK Button on main unit or remote control to select.
4. Turn and press the NAVIGATE dial to or use the VOL+/VOL- buttons
on the remote control to choose between 'Normal', 'Flat', 'Jazz', 'Rock',
'Movie', 'Classic', 'Pop','News','My EQ', 'My EQ profile setup'.
Setting the bass and treble manually
1. Press and hold the MENU/INFO button to view the main menu.
2. Turn and press the NAVIGATE dial to select 'System settings' > 'Equalizer'
> 'My EQ profile setup'.
3. Turn and press the NAVIGATE dial to choose 'Bass' or 'Treble'.
4. Turn and press the NAVIGATE dial to set the level from '-6dB' (low) to
'+6dB' (high).