Maintenance And Service - Bosch GCU 18V-30 Professional Originalbetriebsanleitung

16 | English
Put an extraction hose (dia. 35 mm) (15) (accessory) into
the installed adapter (3). Connect the dust extraction
hose (15) to a dust extractor (accessory). You will find an
overview of connecting to various vacuum cleaners at the
end of these operating instructions.
The dust extractor must be suitable for the material being
worked.
When extracting dry dust or dust that is especially detri-
mental to health or carcinogenic, use a special dust ex-
tractor.
Operation
Adjusting the depth stop (see figure D)
The cutting depth may be adjusted only when the
u
power tool is switched off.
Proceed as follows to adjust the depth stop:
– Place the depth stop (2) on the workpiece to be pro-
cessed.
– Loosen the fastening screw (9) to adjust the depth
stop (2).
– Push the depth stop (2) to the required position and
tighten the fastening screw (9).
– Make sure before starting work that there is enough space
behind the workpiece so that the application tool does
not encounter a hard substrate.
Starting Operation
Switching On and Off
Set the cutting depth before switching on.
To switch on the power tool, press and hold the on/off
switch (5) until the worklight (4) turns on and the tool
powers on. The on/off switch (5) must be held for longer
than 1 second to prevent accidental actuation of the tool.
To switch off the power tool, press the on/off switch (5).
The power tool will be turned off immediately and the applic-
ation tool will come to an immediate stop due to the motor
brake.
Working Advice
Protect application tools from shock and impact.
u
The power tool can be used for cutting up to a material thick-
ness of 32 mm.
Cut-outs of any shape are possible without pre-drilling by in-
serting the application tool while the power tool is running.

Maintenance and Service

Maintenance and Cleaning
Remove the battery from the power tool before carry-
u
ing out work on the power tool (e.g. maintenance,
changing tool, etc.). The battery should also be re-
moved for transport and storage. There is risk of injury
from unintentionally pressing the on/off switch.
1 609 92A 8A2 | (02.09.2022)
To ensure safe and efficient operation, always keep
u
the power tool and the ventilation slots clean.
After-Sales Service and Application Service
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. You can find explosion drawings and information on
spare parts at: www.bosch-pt.com
The Bosch product use advice team will be happy to help you
with any questions about our products and their accessor-
ies.
In all correspondence and spare parts orders, please always
include the 10‑digit article number given on the nameplate
of the product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
You can find further service addresses at:
www.bosch-pt.com/serviceaddresses
Transport
The recommended lithium-ion batteries are subject to legis-
lation on the transport of dangerous goods. The user can
transport the batteries by road without further require-
ments.
When shipping by third parties (e.g.: by air transport or for-
warding agency), special requirements on packaging and la-
belling must be observed. For preparation of the item being
shipped, consulting an expert for hazardous material is re-
quired.
Dispatch battery packs only when the housing is undam-
aged. Tape or mask off open contacts and pack up the bat-
tery in such a manner that it cannot move around in the
packaging. Please also observe the possibility of more de-
tailed national regulations.
Disposal
Power tools, rechargeable batteries, accessor-
ies and packaging should be sorted for environ-
mental-friendly recycling.
Do not dispose of power tools and batteries/re-
chargeable batteries into household waste!
Only for EU countries:
According to the Directive 2012/19/EU on waste electrical
and electronic equipment and its transposition into national
Bosch Power Tools