Samsung Jet Bot VR30T85 Serie Benutzerhandbuch Seite 16

Notes and cautions
Cleaning and maintenance
NOTE
• If you washed the Dustbin and filter with
water
- Dustbin: Completely wipe out the water.
- Filter: Completely dry it in the shade
before use.
• Do not use water to clean the Fine dust
Filter, just shake it to clean.
• If suction power decreases continuously, or
the Jet Bot overheats, clean the Fine dust
Filter.
CAUTION
• Watch your fingers when attaching or
detaching the filter, since they may get
stuck in the Dustbin's intake.
• To avoid blockages by foreign matter, do
not let the Jet Bot vacuum up toothpicks,
cotton swabs, etc.
• If it is difficult to remove foreign matter
from the brush, contact an authorized
SAMSUNG service center.
• Since the brush sweeps dirt up from the
floor during cleaning, foreign matter such
as a thin and long thread, long hair, etc.
may get caught in it. For the best cleaning
results, check and clean it regularly.
• Turn off the Jet Bot before cleaning or
maintenance work.
• If a brush or a brush cover is not assembled
correctly after the maintenance work,
scratches may occur on the floor, or
product malfunction may occur. Therefore,
assemble them correctly by checking the
maintenance method.
16 English
Battery usage
NOTE
• When you purchase a battery, check the
SAMSUNG logo (
battery and the model name, then contact a
service center.
• This battery is exclusively for the SAMSUNG
Electronics Jet Bot. Do not use it for any
other products or purposes.
• Do not disassemble or modify the battery.
• Do not throw the battery out in fire or heat
it.
• Do not connect any metallic object to the
charging contacts (+, -).
• Store the battery indoors (at 0 °C ~ 40 °C).
• If the battery malfunctions, do not
disassemble it yourself. Contact your
nearest SAMSUNG service center.
• As the battery is used over a length of time,
the battery charging time and usage time
decreases. In this case, contact a service
center and replace it with a new battery.
• Do not disassemble the battery yourself
and make sure short circuit of +, - poles
does not occur.
• When battery leak occurs, make sure it
does not touch your skin or eyes.
) attached on the