Roadstar IR-540D+BT Bedienungsanleitung Seite 11

English 8
is upgrade available on the server.
RESET TO DEFAULT: To set all the settings back to default settings.
Please note: all the Station presets, Settings and configuration will be lost
after you have performed the "Factory Reset".
PLAYING COMPACT DISC
Choose "CD" from the menu.
Long press LEFT/RIGHT buttons (6/9) to select song or press CD/MP3 buttons (6/9)
on remote control.
Press OK button (12a) to PLAY/PAUSE the playback. The track number will start
blinking. Press OK button (12a) again to resume the playback.
Press STOP (7) to stop the playback.
REPEAT MODE
During playback, repeatedly press REP button (8) to select:
Repeat1: The current track is played repeatedly.
RepeatFolder: The current folder is played repeatedly.
RepeatAll: All tracks are played repeatedly.
CD PROGRAMMING
In CD mode, simply press Stop then Prog button.
"Track 1, P:1" will appear on display when you are playing CD disc. It shows "001
P:1" when you are playing MP3 disc.
Press UP or DOWN button to select the desired track and then press Prog button.
The display show "Track 1, P:2".
Repeat step 3 and 4 to program next tracks.
Simply press Stop button to stop Track Program, the programed tracks will auto-
matically play.
Double press Stop button to cancel program tracks.
AUX IN OPERATION
Choose "AUX" from the menu.
Use one male to male 3.5mm jack cable (not included) to connect any external au-
dio device to the AUX-IN SOCKET (14).
Note: Music control (play, pause, etc) must be done from your external device.
USB FAST CHARGE ON BACK
This USB can fast charge your device. Fast charge depends on the cable used and
device equipment.