Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
8 PC-Software
The following describes the installation and use of the "BIT PS 3.0" software. The end device should
be operable with at least Windows 7.
8.1 Installation
Download the BITPS 3.0 software from www.broering.de/eq/bitps.exe. To do this, enter the link in
your web browser. A small window will open. Click on "Save file".
Then start the corresponding BITPS_Setup.exe file. You will normally find this in your download
folder.
Click on "Next >", select the installation path and install the program.
8.2 Program start
When you start the program for the first time, you will not see any data. To import the data from
your scale into the PC software, connect the scale to the PC using the supplied USB cord and click
on t "Load data".
This is explained in more detail in chapter
8.3 Importing measurement
data.
At the top of the window, you will find two menu bars.
69
Werbung
Inhaltsverzeichnis
