Delayed Programme Start - Pkm WA8-ES1416 DAI Bedienungsanleitung

If you do not want the washing machine to perform a final spinning cycle, press
the « S » -
PEED
The final spinning cycle will not be performed.
If the selected washing programme cannot be combined with the desired
functions, these functions cannot be selected or the corresponding indicators
flash for 3 seconds or the functions will be cancelled and the indicators switches
off automatically (depending on model).

5.3.3 Delayed programme start

F
UNCTION
❖ You can set a delayed programme start.
❖ Set the washing programme and the desired additional function first and then
activate the « D
You can choose a delay period from 3 to 24 hours.
The delay period must be longer than the duration of the washing programme as
the set delay time defines the end of the washing programme.
Do not use liquid detergent when you use the « D
liquid detergent container (washing ball, etc.) could tip over in the washing drum
and the liquid detergent could therefore come into contact with the dry textiles.
If the washing programme starts later and the liquid detergent is in contact with
the dry textiles for a longer period of time, it may cause stains on the textiles that
are difficult to remove.
The « D » -
ELAY
chapter 4.3 T
HE ADDITIONAL FUNCTIONS
It is possible that the current run time of the selected washing programme will be
adjusted automatically so that it may vary from the washing time which is
indicated on the display.
H
OW TO ACTIVATE A DELAYED PROGRAMME START
1. Press the « O
).
MODE
2. Set the desired washing programme using the rotary knob (1). Set the desired
additional function(s) using the corresponding buttons.
3. Press the « D
ELAY
- 24 h / desired end of the washing programme in h) is indicated on the display.
Depending on model.
38
(4) repeatedly until the indicator «
BUTTON
« D » =
ELAY
» -
ELAY FUNCTION
may not be available for all programmes (see also
FUNCTION
/ O » -
N FF BUTTON
» - (6) repeatedly until the desired delay period (3 h
BUTTON
DELAYED PROGRAMME START
using the corresponding button.
).
(8) to switch on the appliance (
~ ~
125
0 --
/ » is displayed
» -
ELAY FUNCTION
STANDBY
.
38
. The