Klarstein COMBO AIR Bedienungsanleitung Seite 30

EN
30
Airfry + Grill
Note: For this function, the inner container or the inner container with deep-
frying basket can be used for grilling and deep-frying food.
1. Open the top cover and place the inner container in the right position in the
housing.
2. Plug the device into the mains outlet and press the power button. The "Grill"
indicator light will be solid on the screen. The preset temperature setting
lights up on the screen and the preset time
3. Press the Airfry + Grill button. The corresponding indicator lights up. The LED
screen will show
4. Select the desired temperature with the buttons
power settings to choose from: LOW, MED, HIGH and MAX
the preparation time with the
information on time adjustment, see the section "Time and temperature
settings for menus".
Note: The temperature and time cannot be adjusted after the unit has started
operation.
5. Press the START/STOP button to start preheating. The symbol
displayed on the LED screen.
6. When the preheating process is complete, a beep is heard. "Add Food" is
displayed on the LED screen. Open the top cover and put the desired food and
seasonings into the inner pot for preparation. Then close the top cover.
7. Press the START/STOP button. The unit starts operation. The time is displayed
on the LED screen and starts counting down.
Note: The top cover must be closed when using the Airfry + Grill function.
Otherwise, the unit cannot start operation. If the top cover is opened during
preparation, preparation is paused. After 5 minutes, the unit beeps, the
symbol blinks, the unit stops operating and switches off automatically.
20:00 and the preset temperature setting
and buttons. For more detailed
20:00 is displayed.
.
or . There are 4
. Adjust
is