Olivetti d-Copia 2000 Kopiererbedienungsanleitung Seite 82

System Setting
System Menu
Items
38.Hagaki/A6RDet
39.B4R/Folio Det
40.11x15" Detect
41.Copy Limit
42.Duplex 2nd
43.Stitch Width
44.Border Erase
45.4 in 1 Layout
46.Combine Border
47.Rotate/Offset
48.Auto Rotation
49.Silent mode
50.Auto Clear
5-6
Description
Select the paper size when copying an original
document of non-standard size.
Select the paper size when copying an original
document of non-standard size.
When the size of original document is 11 x 15", the
original document is automatically zoomed.
Limits the number of copies or sets of copies that can
be made at one time.
Rotates the paper 180 degrees and copies it when
both sides of a sheet are to be copied.
This will not be displayed when the optional Duplex
Unit is not installed.
Sets the initial value for the Binding Margin.
Sets the initial value for the border width that will be
lightened to remove shadows from the sheet or book.
Sets the layout for the order in which the originals will
appear in the 4-in-1 Layout mode.
Selects the type of borderline to be used in the
Layout mode.
Sets the copier so that each copy set is rotated and
collated when it is collate copied.
Sets of copied documents are output landscape/
portrait alternately, allowing easy separation of each
set from the other.
Shortens the amount of time the internal motor
continues to run after the copy is produced. Use this
setting in cases when the motor noise is bothersome.
Sets the copier so that automatic clearing is executed
after a set amount of time has elapsed after the copy
is produced. (Refer to Auto Clear function on page 1-
6.)
Reference
Available settings
Hagaki 5-18
A6 R*
B4 R 5-18
Folio R*
On 5-18
Off*
1 to 999 (*999) 5-19
Rotation On 4-5
Rotation Off*
[Inch specifications] 4-9
0.13/0.25/0.38/0.50/
0.63/0.75 (") (*0.25)
[Metric specifications]
1 to 18 (mm) (*6)
[Inch specifications] 4-11
0.13/0.25/0.38/0.50/
0.63/0.75 (") (*0.25)
[Metric specifications]
1 to 18 (mm) (*6)
Portrait 1* 4-17
Portrait 2
Landscape 1
Landscape 2
Off* 4-17
Solid
Dotted
On: Rotational Collating 5-19
Enabled
Off: Rotational Collating
Disabled*
On: Enabled* 5-20
Off: Disabled
0, 5, 10, 15, 30 5-20
(seconds) (*10)
On: Enabled* 5-20
Off: Disabled
OPERATION GUIDE
Page