E26
E27
E28
E40
E41
E42
E43
☆ If you do not understand these directions, or if you have any doubts about the
safety of the installation, please call a qualified technician.
☆ Check carefully to make sure there are no missing or defective parts. Improper
installation may cause damage or serious injury.
☆ Do not use this product for any purpose that is not explicitly specified in this
manual and do not exceed weight capacity.
☆ We cannot be liable for damage or injury caused by improper mounting, incorrect
assembly.
ELECTRICAL SAFETY INSTRUCTIONS
THIS PRODUCT IS POWERED BY ELECTRICITY. IN ORDER TO AVOID
BURNS, FIRE AND ELECTRIC SHOCK, PLEASE READ THE FOLLOWING
INSTRUCTIONS CAREFULLY.
1.DO NOT CLEAN PRODUCT WHILE POWER IS CONNECTED.
2.DO NOT DISASSEMBLE OR REPLACE COMPONENTS WHILE POWER IS
CONNECTED.
3.NEVER OPERATE THE SYSTEM WITH A DAMAGED CORD OR PLUG. PLEASE
CONTACT YOUR SELLER TO REPLACE DAMAGED PARTS.
4.NEVER OPERATE SYSTEM IN DAMP ENVIRONMENTS OR IF ANY
ELECTRICAL COMPONENTS HAVE MADE CONTACT WITH LIQUIDS.
5.ALTERATIONS OF THE GIVEN POWER UNIT ARE NOT ALLOWED.
6.OUTDOOR USE IS PROHIBITED.
Motor 2 blocked
Motor 2 runs in the wrong
direction
Motor 2 is overloaded
The controller is
disconnected in series
Series signal is wrong
Memory error
Blocking sensor error
WARNING!
14
Reinitialize
Exchange motor wire
or Hall wire
Reduce loads
Check the connection line
Check the connection line, or
replace the controller
Replace the controller
Replace the controller