HBM PW18C3 Serie Montageanleitung Seite 5

PW18C3... Single point load cells
Remaining dangers
The scope of supply and performance of the load cells covers only a small
area of weighing technology. In addition, equipment planners, installers and
operators should plan, implement and respond to the safety engineering
considerations of the weighing technology in such a way as to minimize
remaining dangers. Prevailing regulations must be complied with at all times.
Reference must be made to the remaining dangers associated with the
weighing technology.
In this Manual, remaining dangers are pointed out by symbols (see below):
Symbol:
Meaning: Possibly dangerous situation
Warns of a potentially dangerous situation in which failure to comply with
safety requirements could lead to damage to property, slight or moderate
physical injury.
Symbols for application instructions and useful information:
Symbol:
Means that important information about the product or its handling is being given.
Symbol:
Meaning: CE mark
The CE mark enables the manufacturer to guarantee that the product
complies with the requirements of the relevant EC directives (the declaration
of conformity is available at http://www.hbm.com/HBMdoc).
Symbol:
Meaning: Statutory waste disposal mark
In accordance with national and local environmental protection and material
recovery and recycling regulations, old devices that can no longer be used
must be disposed of separately and not with normal household garbage.
If you need more information about waste disposal, please contact your local
authorities or the dealer from whom you purchased the product.
A2445-1.0 en/de/fr
CAUTION
NOTE
5
HBM