Bluetooth (Handsfree Calling And Music Streaming); Before Using The Bluetooth Function; Bluetooth Operations; Configuring Bluetooth Settings - Sony MEX-BT5700U Bedienungsanleitung

Bluetooth (Handsfree calling
and Music streaming)
Before using the Bluetooth
function

Bluetooth operations

To use the Bluetooth function, the following
procedure is necessary.
1 Pairing
When connecting Bluetooth devices for the
first time, mutual registration is required. This
is called "pairing." This registration (pairing)
is required only for the first time, as this unit
and the other devices will recognize each
other automatically from the next time. You
can pair up to 9 devices. (Depending on the
device, you may need to input a passcode for
each connection.)
2 Connection
To use the device after pairing is made, start
the connection. Sometimes pairing allows to
connect automatically.
3 Handsfree calling/Music streaming
You can talk handsfree and listen to music
when the connection is made.
For details of usable devices, visit the following
support site.
Support site
http://support.sony-europe.com/

Configuring Bluetooth Settings

Before connecting to a Bluetooth device,
configure the Bluetooth Settings on this unit.
1
Press (BT).
The Bluetooth settings menu appears.
2
Rotate the control dial until the
desired menu item appears, then
press the select button.
Depending on the setting, by rotating the
control dial again, other items can be set.
3
Rotate the control dial to select the
setting, then press the select button.
To return to the previous display
Press (BACK).
To exit the Bluetooth settings menu
Press (BT).
Bluetooth Settings menu
Signal
Switches the Bluetooth signal output of this unit
to "on" or "off."
– "on": to output the Bluetooth signal.
– "off": to not output the Bluetooth signal.
Be sure to set to "on" when you connect from a
Bluetooth device.
Visibility
Allows other Bluetooth devices to search for
this unit.
– "Show": to allow the other device to search.
– "Hide": to not allow the other device to search.
Be sure to set to "Show" when you search for
this unit from a Bluetooth device.
Device Name
Changes the name of this unit displayed on
connected device. (Default setting: "XPLOD")
Select "Rename" and input characters. Up to 13
characters can be input.
To restore "XPLOD," select "Default."
Search
Searches for other Bluetooth devices (page 24).
Device List
Shows the list of registered devices.
Select the name of device to connect / to
disconnect from this unit.
To delete all devices, select "Delete All."
Auto Answer
"off": to not start a call until
pressed.
– "Short": to start a call automatically when
received, about 3seconds later.
– "Long": to start a call automatically when
received, about 10seconds later.
Ringtone
Switches the ring tone.
– "Cellular* 1 ": to output the ring tone set with
the cellular phone.
– "Default": to output this unit's ring tone.
EC/NC Mode* (Echo Canceller/Noise
2
Canceller Mode)
Reduces echo and noise in phone call
conversations.
Set to "Mode 1" normally. If the quality of the
outgoing sound is unsatisfactory, set to "Mode
2" or "off."
continue to next page t
(handsfree) is
23