The Learning Feature - One for All URC-7140 Bedienungsanleitung

URC-7140_Essence4_21t_711752_RDN1050321.qxp_OFA
(How to copy functions from your original working remote onto the ONE FOR ALL 4
Example: How to learn (copy) the "I/II (mono/stereo)" function from your
original remote onto the "red key" on your ONE FOR ALL remote control.
Press and hold magic for 3 seconds until a mode indicator (Blue LED) stays lit.
Select the
corresponding
device e.g. TV
Press 9 7 5.
ATTENTION: Place both remote controls on a flat
2
surface. Make sure that the ends you normally
point at your device are facing each other.
Align both remotes also in height
First; Press the "red" key.
The TV LED will flash rapidly.
• If you want to copy other functions within the same mode, simply repeat step 4
pressing the next key you want to copy by learning.
• You can learn approximately 100 functions.
3
Press and hold the magic key for 3 sec.
10

The Learning Feature

3 sec.
< select >
3 sec.
--> The blue LED will blink twice.
2 - 5 cm
then;
Press the "I/II (mono/streo)" key.
The blue LED will blink twice to
confirm successful learning.
--> The blue LED will blink twice and
switch off.
WWW.ONEFORALL.COM
04-03-2021 20:1
)
x2
x2