Auto Power Off; Monitor/Viewfinder Settings - Leica M10 Anleitung

EN

Auto power off

This function turns the camera off automatically after a preset
time.
Setting the function
1. Select the menu item
2. in the sub-menu the desired duration or switch the function
.
Off
Note:
Even if the camera has been switched off by this function, it can be
started again at any time by pressing the shutter button
148
, and
Automatic Power Saving
18

Monitor/viewfinder settings

Switching between monitor and viewfinder
If you are using the viewfinder available as an accessory, you can
specify both for the Live View and the Review mode, when the
monitor or the viewfinder should be used for the displays in ques-
tion. In the factory settings, the change is automatic (using the
proximity sensor in the viewfinder eyepiece)
Setting the function
1. Select the menu item
2. in the sub-menu
.
LV Screen Target
3. In both associated sub-menus, either select
the displays in question should be only on the monitor -
, or only in the viewfinder -
tor
, and
EVF/Display Control
(for the Review mode) or
Play Screen Target
(for the Live View mode).
Auto
.
EVF
, or whether
Moni-