Description Of Remote Control; Auto Mode; Fan Speed Adjustment - turbionaire TREND HRV Bedienungsanleitung

7. DESCRIPTION OF REMOTE CONTROL

ON/ OFF
1. Unit ON/ OFF
2. LED indicator: Red static indicator if off / Yellow static indicator if on

AUTO MODE

1. It alternates air intake mode with air extraction mode at the set speed. If the humidity is higher than the set value, then the device only
works in air extraction mode at the set speed. If the humidity falls below the set value again, then the unit starts working again,
alternating air intake and air extraction modes.
2. Any pressing of any button, except for ON/OFF or LED ambient light, or the DIMMER button, cancels the AUTO mode.
3. The LED indicator is static GREEN if the device is in AUTO intake-extraction mode.
4. The LED indicator is flashing GREEN if the device is in AUTO evacuation mode.

FAN SPEED ADJUSTMENT

1. Press the button to reduce from speed 8 to speed 1.
2. Press the button to increase from speed 1 to speed 8.
3. LED indicator: BLUE flashing with each press; speeds 1 and 8 are highlighted by the PURPLE flashing color.
TIMER MODE
1. The device works for 1-30 minutes at the set speed, after which it stops.
2. Any pressing of any button except the ON/OFF buttons, Ambient LED lighting (for models equipped with this function) and DIMMER,
cancels TIMER mode.
16