Installation Of The Glass Screen; Gas Cylinder Montage - Planika Faro Montage- Und Bedienungsanleitung

3.4. Installation of the glass screen

•
Carefully remove cardboard and foam foil from the glass screens.
•
Remove all contaminations from the glass shields which could burn out on the glass during operation of the
FARO (in particular fingerprints).
•
Install glass shields in the corresponding slots on the top of appliance.
•
Install the metal hood on the top of the all four glass screens
•
Remove the glass shield only in case of damage of the glass.

3.5. Gas cylinder montage

The gas linkage attached to the device allows to place the gas bottle maximally 1 meter away from the connected
control panel during it replacement. During operation the gas cylinder is hidden inside the device behind easily
removable doors.
Fig 5– Installation of the glass in slots
Fig 6– Installation of the top
Fig 7– Gas cylinder installation
8