Room Temperature Control - MSW Motor Technics MSW-DEH3090H Bedienungsanleitung

Timer setting (1 hour-24 hours): Press the SET button to
set the timer.
Setting the switch-off time while the device is turned on:
Press the SET button to activate the timer function.
•
• Press the ADD / MINUS buttons accordingly to set the time to turn off the unit.
Setting the switch-on time while the device is switched off:
Press the SET button to activate the timer function.
•
Press the ADD / MINUS buttons accordingly to set the time to turn on the
•
appliance.
Setting the device's work cycle while the machine is turned on:
Press the SET button to activate the timer function.
•
• Press the ADD / MINUS buttons accordingly to set the time to turn off the
device.
Press the ADD / MINUS buttons accordingly to set the time to turn on the
•
device.
The unit will operate at the set ON/OFF time cycles.
•
Setting the operating cycle of the device while the device is turned off:
• Press the SET button to activate the timer function.
• Press the ADD / MINUS buttons accordingly to set the device's switch-on time.
• Press the ADD / MINUS buttons accordingly to set the time to turn off the unit.
The unit will operate at the set ON/OFF time cycles.
•
Deleting the timer settings:
Press SET again to turn off the timer function.
Note: pressing POWER will also exit the timer setting.
Interior drying
After turning off the unit, press the IN-DRY button to dry the inside of the unit. This will
prevent water-induced corrosion of the unit.

Room temperature control

LED display shows the current temperature in the room.
Automatic defrosting function
At low room temperatures, frost can build up on the evaporator, reducing the airflow
during dehumidification.