5. Press
button (5) to pause, to resume playback press again.
OPERATION AUX IN
1. Connect the Jack/Jack audio cable (supplied) to the AUX jack (8) and the other end to
the external device. The device will automatically go to AUX mode;
2. Start from the external device playback.
LIGHTING EFFECTS SELECTION
Press the button
completely.
TECHNICAL FEATURES
Rechargeable Battery: ............................Lithium to 3.7V,1500mAh
Power: ..................................................5V
Bluetooth max power ransmission: ........0,8mW
Bluetooth transmission frequency: ........2.4GHz
Dimensions: .........................................195 x 85 x 85mm
Weight: .................................................680g
INFORMATION ON THE REMOVAL AND DISPOSAL OF BATTERIES
Warning: the operation of removal and disposal is reserved to technical personnel!
Whatever type of battery used up, it should never be placed in household waste, fire or water. Each
type of used battery must be recycled or disposed of at an appropriate dedicated collection points.
To remove the battery:
1. Remove the cover grille above the speakers.
2. Unscrew all the screws present and separate the front part of the cabinet from the rear
one;
3. Identify the battery, remove it and replace it with one of the same characteristics and
capacity.
Precautions for correct disposal of the product.
The symbol shown on the equipment indicates that waste must be disposed of in "separate
collection" and so the product must not be disposed of together with urban waste.
The user must take the product to special "separate waste collection centres" provided by local
government, or deliver it to the retailer against the purchase of a new product.
Separate collection of waste and subsequent treatment, recycling and disposal operations
promotes the production of equipment with recycled materials and limits negative effects on
the environment and on health caused by improper handling of waste.
Illegal disposal of the product leads to the enforcement of administrative penalties.
(4) several times to select the desired lighting effect or to switch Off
1A