Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Please read the manual completely and the instructions below before using the
•
Note: ONLY use the supplied charger labelled XHK-800B-4220 with the following output voltage
to charge this Electric scooter: 42V – 2A.
•
Using another charger may damage the product or create other potential risks.
•
Never charge the product without supervision.
•
The charging period of the product should not exceed four hours. Stop charging after four hours.
•
The product should only be charged in temperatures between 0°C and 45°C.
•
If charging at lower or higher temperatures, there is a risk that the performance of the battery
will be reduced and a potential risk of damage to the product and personal injury.
•
The product should only be used in temperatures between -10°C and +45°C.
•
If used at lower or higher temperatures, there is a risk that the performance of the battery will
be reduced and a potential risk of damage to the product and personal injury
•
Store the product at temperatures between 0°C and 35°C. (optimum storage temperature is
25°C)
•
Charge and store the product in an open, dry area and away from flammable materials (i.e.
materials that may burst into flames).
•
Do not charge in sunlight or near open fire.
•
Do not charge the product immediately after use. Let the product cool down for one hour before
charging.
•
If the product is left with other persons for example during a holiday period, it should be partially
charged (20-50% charged). Not fully charged.
•
When shipped from the factory, the product has often been partially charged. Keep the product
in a partially charged state, until it is going to be used.
DENVER ELECTRONICS A/S
Omega 5A, Soeften, 8382 Hinnerup, Denmark
www.denver-electronics.com
WARNINGS
product.
Product names:
SEL-10350 ODIN
Product type: Electric scooter
Year of manufacturing: 2021
26
Werbung
Inhaltsverzeichnis
