5. Stand lnstalla�on
1. Open the package, and then take out the foam and place it on a table.
2. Take off the upper cover of styrofoam, take out the fuselage from the
plas�c bag, and place it in the lower cover cavity of poly dragon again.
3. Take out the bracket and base, and lock them with three PM5*15mm
countersunk screws (including one spare screw), as shown in the figure above.
PM5*15mm
screws
Carton
styrofoam underneath
Bracket
Base
Eng-4
upper styrofoam
Monitor
styrofoam underneath