Lan - Devolo MAGIC 1 LAN1-1 Handbuch

29 Configuration
In order to mitigate any potential negative effects
the device provides the following options:
Automatic compatibility mode
If the option Automatic compatibility mode (re-
commended) is enabled, the device can automati-
cally adjust the output signal to avoid interference
as much as possible. This option is configured by
default.
Manual compatibility mode
If an interference has not been eliminated despite
activating the automatic setting, please disable it
and set the compatibility mode as well as the signal
transmission profile manually:
b
SISO
a
Full power
a
VDSL 17a (default)
a
VDSL 35b
Get in touch with your internet provider to
find out which signal transmission profile is
the best option for your internet connection.
The SISO operating mode and the VDSL 17a signal
transmission profile are configured by default.
1-1
devolo Magic 1 LAN

4.4 LAN

You make changes to the network settings in the
LAN area.
You can access the web interface for the
devolo Magic 1 LAN using its current IP address.
This may be an IPv4 and/or IPv6 address, which is
either entered manually as a static address or auto-
matically retrieved from a DHCP server.