Product Liability; Safety; Safety Definitions; General Safety Instructions - Husqvarna CG 200 Bedienungsanweisung

1. Voltage power supply
2. Water resistance
3. Nominal engine output
4. Frequency
5. Rotation speed
6. Weight
7. Production date, year, week, serial number
8. Product number

Product liability

Before leaving our factory every product passes an
exacting inspection programme in which everything is
checked minutely. Following the instructions will ensure
that your product gives long service, in normal operating
conditions.

Safety definitions

Warnings, cautions and notes are used to point out
specially important parts of the manual.
WARNING:
injury or death for the operator or bystanders
if the instructions in the manual are not
obeyed.
CAUTION:
damage to the product, other materials or
the adjacent area if the instructions in the
manual are not obeyed.
Note:
Used to give more information that is necessary
in a given situation.

General safety instructions

WARNING:
manual carefully and make sure you
understand the instructions before using the
product.
WARNING:
operation manual that is supplied with the
engine and make sure you understand the
instructions before using the product.
The product is designed to provide safe and reliable
service in operating conditions corresponding with the
instructions, but it can present dangers for the user and
risks of damage, consequently regular on site inspection
is necessary to ensure:
• Perfect technical condition (use for the purpose for
which it is intended and taking into account any
130 - 004 - 19.01.2023
Used if there is a risk of
Used if there is a risk of
Please read the operator's
Please read the engine
The manufacturer declines all responsibility for loss
or damage resulting from misuse or any modification,
alteration or powering that does not conform to the
manufacturer's original specifications.
The user advice and spare parts mentioned in this
document are given as an indication, and do not
constitute an undertaking. No warrantee will be granted
in the event of errors or omissions, or for damage
occurring during delivery, or caused by the design or
use of the product. We are very concerned about the
quality of our products and we reserve the right to make
any technical modifications to improve them, without
warning.

Safety

risks, and correction of any malfunction detrimental
to safety).
• That the warnings and instructions marked on the
product are followed (adequate personal protection,
correct use, general safety instructions, etc).
• The product is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge.
• Children shall be supervised not to play with the
appliance.
• That the product is for commercial use.
WARNING:
cord to come in contact with rotating
brushes.
Note:
Operator´s manual should always be available
at the place of work. It should be read and used by any
person installing or using the product. The obligatory
technical regulations in force in the country where the
product is used must also be adhered to for maximum
safety.

Safety instructions for assembly

The original drums from manufacturers' should be used.
Do not use any other drum whose shape, size and
mounting do not fit the product.
Check that the parts are properly fixed (no abnormal
vibration) and that it is correctly assembled.
No modification, transformation or addition that is
detrimental to safety and that it is carried out without
prior authorization from the manufacturer should be
done.
Do not allow the supply
5