Defrosting; Shipment And Repositioning; Transportation And Changing Positioning; Repositioning The Door - EAS ELECTRIC EMC186AZDX Bedienungsanleitung

5.1 Defrosting

• Your appliance performs automatic
defrosting. The water formed as a
result of defrosting passes through
the water collection spout, flows
into the vaporisation container
behind your appliance and
evaporates there.
• Make sure you have disconnected
the plug of your appliance before
cleaning the vaporisation
container.
• Remove the vaporisation container
from its position by removing the
screws as indicated. Clean it with
soapy water at specific time
intervals. This will prevent odours
from forming.
Replacing LED Lighting
If your appliance has LED
lighting contact the help desk as this
should be changed by authorized
personnel only.
6 SHIPMENT AND
REPOSITIONING
6.1 Transportation and Changing
Positioning
• The original packaging and foam
may be kept for re-transportation
(optional).
• Fasten your appliance with thick
packaging, bands or strong cords
and follow the instructions for
transportation on the packaging.
• Remove all movable parts (shelves,
accessories, vegetable bins, and so
on) or fix them into the appliance
against shocks using bands when
re-positioning or transporting.
Always carry your appliance
in the upright position.

6.2 Repositioning the Door

• It is not possible to change the
opening direction of your appliance
door if door handles are installed on
the front surface of the appliance
door.
• It is possible to change the opening
direction of the door on models
without handles.
• If the door-opening direction of
your appliance can be changed,
contact the nearest Authorised
Service Centre to change the
opening direction.
EN - 90
V.2