Inhaltsverzeichnis
Werbung
STEP 1
Take the Left & Right Strut Bars (5) and slide over the
outer poles of the Rear Axle Support Bar (4).
Align the holes on the Strut Bars over the curved end of
the Tub (1), then take 6 M8X20 Truss Head Bolts (B), each
with a M8 Lock Nut (C) and M8 Washer (D), and attach
through the holes as shown.
B
D
C
STEP 3
Attach the assembled Axle Support to the
Tub (1) using 2 M8X20 Truss Head Bolts (B)
and secure into place using M8 Lock Nuts
(C) and M8 Washers (D).
A5P | 01
ASSEMBLY
B
STEP 2
Attach the Support Frame (2) to the Front Axle
Support (3), using 4 M8X20 Truss Head Bolts
(B) and secure into place using M8 Lock Nuts
(C) and M8 Washers (D).
C
5
4
D
C
C
B
1
B
D
Werbung
Inhaltsverzeichnis
