Manual Operation - Teka HLB SC Bedienungsanleitung

Water hardness
Type Ca + English
Mg deg.
(ppm) [°eH]
0 to 150 0 to 11
SOFT
151 to
12 to 25
MED
350
501 to
26 to 35
HARD
500
Oven use

MANUAL OPERATION

• After setting the clock, the oven is ready
for use. On turning the control dial, the pre- On turning the control dial, the pre-
defined temperature is shown for each func-
tion. Turn the temperature dial to select a
new temperature and press
selection.
INFORMATION
While cooking, when the selector switch is
turned, the clock display will show the tem-
perature and it is possible to change the
oven cooking temperature by turning the
temperature dial again and pressing
confirm.
• You will notice that the
during cooking to indicate that heat is being
French German
deg. [°fH] deg. [°dH]
0 to 15 0 to 8
16 to 35 9 to 20
36 to 50 21 to 28
to confirm
to
symbol lights up
WARNING
In the event of power failure, the water hard-
ness settings will be erased. Reset it and
program again after power restore.
transmitted to the food. This symbol disap-
pears when the selected temperature has
been reached.
• Set the controls to
INFORMATION
When you start cooking, your oven will
show the time the oven has been cooking.
INFORMATION
If you have selected the steam cooking func-
tion, remember to fill the water tank before
starting to cook.
The symbol remains lit on the clock dis- symbol remains lit on the clock dis-
play throughout the cooking process.
English
to turn off the oven.
31
User's Guide