Bollhoff Portable C RIVSET Bedienungsanleitung Seite 34

Portable C
RIVSET (10 - 50 kN) | WELTAC
®
Through an optional USB adapter (accessory) a re-
port can be generated at the end of a working ses-
sion at a PC documenting the proper function of the
tool.
The oil used in our tool is particularly environmen-
tally friendly and and has been rewarded
Angel". The oil is also suitable for low temperatures
and has excellent lubrication characteristics.
All tool functions can be controlled by one trigger.
This results in an easy handling and a better grip
compared to a two button operation.
The compact ergonomically formed design consists
2K
of 2 components. The grip area is rubber coated
and therefore slip resistent. The housing design is
optimized in respect of the center of gravity which
improves the handling and supports fatique-proof
working.
Li-Ion batteries do neither have a memory eff ect nor
self discharge. Even after long periods of non ope-
ration the tool is always ready to operate. In addition
we see a lower power weight ratio with 50% more
capacity and shorter charging cycles compared to
NiMH batteries.
3.3 Description of the tool indication
See Tab. 2.
Prior to operating the unit the charging level of the batte-
ry should have been tested. A low charging level can be
detected by the fl ashing of the LED for 20 s at the end of
a riveting cycle.
3.4 Assembly of the C-frame
see pic. in front
1. Retract the piston completely (possibly press the re-
tract button.
2. Loosen the hexagon socket head cap screw at the
C-frame and loosen the head plate.
3. Unscrew the C-frame.
4. Remove the aluminium cover from the riveting head
and screw it on the other riveting head which is not
needed. The hexagon socket head cap screw must be
completely screwed in to avoid damages during sto-
rage.
Attention
Avoid debris such as dust and dirt to penetrate
the cylinder while changing the C-frames.
5. Loosen hexagon socket head cap screw and screw the
C-frame onto the base tool
6. Fix the C-frame with hexagon socket head cap screw
and iron plate.
Abb. ähnlich / pic. similar
HE.18644_A © 08/2019
(10 - 50 kN)
®
4. Remarks in respect of the
determined use
4.1 Operation of the unit
Cycle: see pictures in front
„The Blue
First the proper tool kit are selected for the required ap-
plication.
Attention
The tool kit can be mounted or removed from the riveting
tool with an hexagon socket screw key (2 mm).
Now the working cycle will be proceeded.
Attention
Do always adjust the joining force according to
your current application. Ignoring that warning
might destroy the tool kit.
Attention
Attention
or jewellery. Keep your hair, clothing and gloves
away from moving parts.
Attention
tered and dark areas might trigger accidents.
Attention
times.
Attention
tection.
translation of the
original instruction manual
Do not operate the tool without workpiece/
plates
The riveting process can be interrupted at
any moment by releasing the Trigger.
Attention
Attention
Use eye protection when ope-
rating the tool.
After having terminated the working cycle
and prior to changing the tool kit remove
battery to avoid unintended use. Avoid un-
intended starts. Make sure the switch is in
the off position before plugging in.
Dress properly. Do not wear loose clothing
Keep work area clean and organised. Clut-
Keep proper footing and balance at all
Use safety gear and always wear eye pro-
2
GB