Technical Data - Bright 021349 Bedienungsanleitung

• Contact your doctor before using the
appliance if you have any questions
concerning your health.
• Contact your doctor before using the
appliance if you have a pacemaker.
• Contact your doctor before using the
appliance if you are pregnant, or have
diabetes or any other illness.
• Stop using the appliance immediately and
seek medical attention if you experience
discomfort and/or prolonged muscular
pain or painful joints. Prolonged pain can
be a symptom of a serious medical
condition.
• Do not use the appliance on sores,
discoloured skin, swellings, burns, skin
rashes or inflamed areas.
• Do not add bath oil or the equivalent to
the water, this can reduce the bubble
function.
SYMBOLS
Safety class II.
Approved as per
applicable directives.
Recycle discarded product
in accordance with local
regulations.

TECHNICAL DATA

Voltage
Output
Cord length
Weight
Size
230V ~ 50 Hz
80 W
1.8 m
1.9 kg
410 x 395 x 195 mm
DESCRIPTION
1. Mode selector
2. Massage roller
3. Bubble massage
4. Massage roller
5. Infrared light
FIG. 1
USE
Switch off the foot bath and pull out the plug
before filling.
1. Fill the container with warm water.
2. Plug in the plug and start the foot bath.
3. Sit down and put your feet in the container.
4. Turn the function selector to the required
mode.
0: Off
1: Vibration
2: Bubbles and heat
3: Vibration, bubbles and heat
5. Move your feet backwards and forwards in
the container, or use the massage roller
for pleasant and relaxing foot massage.
The foot bath has a heater element to preserve
the temperature of the water filled in the
container.
EMPTYING
1. Switch off the foot bath and pull out the
plug.
2. Tip the foot bath so that the water runs
out through the spout. Never allow water
to run over the control.
MAINTENANCE
CLEANING
• Pull out the plug and allow the foot bath
to cool before cleaning. Clean the foot
bath with a damp cloth.
EN
13