Abask J05 Bedienungsanleitung Seite 22

4.Press the [◀ ] or [▶ ] button to select the Gravity Sensing
setting option,select 【OK】to confirm .
Note:
1.Menus cannot be accessed while the camera is
recording.Please stop the recording before attempting to
access the menu.
2. The default setting of G Sensor is off.
3.If your memory card is filling up quickly you may need to
lower the sensitivity of the G-Sensor (Gravity Sensor)to
decrease the number of triggers caused by normal
driving.It's better to set G-Sensor to "Medium" to avoid too
many useless locked videos.
Parking Monitor
It's used to protect your car after parking.With this function
on,after you stop the car and the camera turns off,it stays
standby.When camera detects shock and collision,it will
automatically turn on and take a short video,then shut down
automatically.
Note:
To set Park Monitor Mode,follow the instructions below.
1.Ensure that the dash cam is not recording.
2.Press the[MENU]Button to enter the Video Menu.
3.Press the [◀ ] or [▶ ] button to select the
Parking Mode setting option,select [OK] to confirm .
4.To use this function when the car is parked,please buy a
hard-wire kit(mini USB type)for dash cam then connect to
the vehicle's fuse box power so as to supply the power to the
camera.
If you have any questions, please contact the after-sales
17