Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
6.4
Measurement display
6.4.1
Navigation
To ensure a clear presentation of the measured parameters, the measurement display consists
of several views. Each view represents a measured parameter which is displayed in the upper
blue area of the view. Switching between the views of the measured parameters is possible with
the RIGHT and LEFT arrow keys.
Some parameter views also have several formats for displaying the parameter, such as the simple
numerical display, the graphical display or the display of the statistical values (minimum value,
maximum value and average). The display format can be changed using the UP and DOWN
arrow keys. The following illustrations show the different display formats for viewing the parameter
flow velocity.
Fig. 7 Numerical, statistical and graphical representation
The following chart shows the available formats of representation of the measured parameters.
Flow
velocity
Numerical
Flow velocity
Minimum,
maximum and
Statistical
average value of
the flow velocity
Graphical
Flow velocity
Volume
Heat output
flow
Volume flow,
volume sum,
Heat output
volume positive,
volume negative
Minimum,
maximum and
Heat output
average value of
the volume flow
Volume flow
Heat output
© PCE Instruments
42
Heat
Tempe-
quantity
rature
Temperature
Heat quantity,
channel 1,
cost
channel 2
and difference
Minimum,
maximum and
average value
for
-
temperature
channel 1,
channel 2
and difference
Temperature
-
channel 1,
channel 2
Werbung
Inhaltsverzeichnis
