Quick Wash; Delayed Start - hanseatic HG6085C14T7635EI Gebrauchsanleitung

Page EN-22 Dishwasher operation

Quick wash

(17)
This option allows you to accelerate the
cleaning programme.
This option is only available with the pro-
grammes , , and
• To activate this option, press the
ton (17).
The indicator (7) in the display (10)
lights up.
• To deactivate this option, press the button
again.
The indicator disappears from the display.
Activate/deactivate automatic
door opening
(16)
The "Automatic door opening" function is ac-
tivated as standard.
• To deactivate the "Automatic door open-
ing" mode, press the
The indicator (8) will go out. The appli-
ance door remains locked when the pro-
gramme has reached the drying phase.
• To activate this function, touch the
ton.
The indicator will light up. The appli-
ance door opens as soon as the pro-
gramme has reached the drying phase.
(7)
.
but-
(8)
button (16).
but-
Selecting the spraying arm(s)
(15) (9)
If only one of the two dish racks is loaded, you
should deactivate the spraying arm which you
do not require.
– Upper dish rack loaded:
– Lower dish rack loaded:
• Press the button (15) as many times as
necessary until only the indicator for the
spraying arm you require lights up.

Delayed start

(6)
The wash cycle normally starts as soon as
you press the button (11).
If you want the cycle to begin later, you can
specify this. The start time can be delayed
between 1 and 24 hours.
• Press the plus or minus button (12) as
often as required until the display (10)
shows the desired start-delay (
to ).
H: 2 4
(12)
,
H: 0 0 H: 0 1