Operation Instructions; Operation; Start Electrical Support - Zipper ZI-EWB150-100L Betriebsanleitung

13

OPERATION

Only operate the machine when it is in perfect condition. Inspect the machine visually every time it is to
be used. Check in particular the safety equipment, electrical controls, electric cables and screwed connec-
tion for damage and if tightened properly. Replace any damaged parts before operating the machine.
13.1

Operation instructions

Unplug battery before all maintenance and settings!
• Never remove the battery while the machine is running
• In case of longer standstill, press the shut-down button
Use the electric motor only with sufficient battery charge
•
13.2 Operation
13.2.1

Start electrical support

ZIPPER MASCHINEN GmbH www.zipper-maschinen.at
10. Step
Making the cable connections
Motor control unit
Make the cable connection of the motor
control unit with the one on the top of the
battery box.
Motor
Connect the motor cable to the ones on
the bottom of the battery box.
machine assembling finished
WAR N I N G
N O TI C E
1. Turn ON-Off-Switch (1) to Position „I"
OPERATION
22
ZI-EWB150-100L