Clatronic EKP 3788 E Bedienungsanleitung Seite 5

IMPORTANT:
Be sure to read the separately enclosed safety instructions first.
Instruction Manual
Thank you for choosing our product. We hope you will enjoy
using the appliance.
Read the instruction manual and the separately enclosed
safety instructions very carefully before using this appliance.
Keep these documents, including the warranty certificate,
receipt and, if possible, the box with the inner packaging in
a safe place. If you pass the appliance on to a third party,
always include all the relevant documents.
Symbols in this Instruction Manual
Important information for your safety is specially marked.
It is essential to comply with these instructions in order to
avoid accidents and prevent damage to the appliance:
WARNING:
This warns you of dangers to your health and indicates
possible injury risks.
CAUTION:
This refers to possible hazards to the appliance or other
objects.
Unpacking the Appliance
1. Remove the appliance from its packaging.
2. Remove all packaging material, such as foils, filling
material, cable ties and cardboard packaging.
3. Check the scope of delivery for completeness.
4. If the contents of the packaging are incomplete or if
damage can be detected, do not operate the appliance.
Return it to the dealer immediately.
Scope of Delivery
1 × Single hotplate
2 × Handle
2 × Contact protection
4 × Screw M3
4 × Screw M4
4 × Cover cap
Warnings for the Use of the Appliance
WARNING: Danger of Burns!
• Do not operate the appliance without handles.
• Do not move the appliance when it is in operation.
• After cooking, the radiated heat may cause dangerous
temperatures at the cooking zone.
EKP3788E_IM - SH separat
CAUTION:
• Keep a sufficient safety distance (30 cm) from easily
inflammable objects such as furniture, curtains, etc.!
• Do not operate the appliance under wall cabinets
because of the rising heat and vapours.
• Do not heat empty cookware on the cooking zone, this
can pass dangerous overtemperatures.
Mounting the Handles
Before using the appliance, the handles on the left and right
side of the housing must be mounted.
1. Hold one of the handles with the inside facing you. Make
sure that the guide pins point upwards.
2. Place the contact protection in the notches under
the guide pins so that the labelling can be read (see
illustration).
3. Insert the guide pins of the handle into the housing so
that they point downwards. Make sure that the contact
protection does not slip.
4. Fasten the handle with the screws provided. The thicker
screws (M4) must be screwed on at the bottom and the
thinner screws (M3) at the top. Use a Phillips screwdriver
for this.
5. Finally, place the cover caps on the screws.
6. Repeat all the steps to mount the other handle.
Notes for Use
Location
• Place the appliance on a level surface that is resistant to
moisture and heat.
• For sensitive surfaces, place a heat-resistant plate
underneath.
• During and after use, make sure that the power cord
does not come into contact with the hot surface of the
appliance.
Electrical Connection
Caution, overload: Do not use extension leads or multiple
sockets as this appliance is too powerful.
1. Turn the temperature control knob to MIN.
2. Check that the mains voltage you want to use matches
that of the appliance. You will find the information on the
type plate.
5
01.12.22