EN
RFC-XL Remote Operation
The RF remote functions will vary from fixture to fixture. Some RF functions on the remote may not be applicable.
Remote
3
QUICK REFERENCE GUIDE
COLOR PICKER
The color picker can be used to select colors manually instead of cycling through preset
colors. In addition, the color picker can increase or decrease the value of several
functions in the fixture such as the dimmer, pan, or tilt.
To manually select a color or adjust the value of a function:
1. Select function such as <PAN>, <DIMMER>, <STROBE> or <FOCUS>.
2. Press any part of the color picker and scroll clockwise or counterclockwise.
GROUP
To select a group on the remote:
1. Press <GROUP>
2. Press the appropriate group control buttons to select the corresponding group.
For example:
•
Press <RED> to select group 1.
•
Press <GREEN> to select group 2.
•
Press <BLUE> to select group 3.
•
Press <AMBER> to select group 4.
3. Once the groups are selected, press any of the applicable functions on the
remote to control the selected fixtures.
NOTE: When a group is selected, the group indicator light will remain on. Several groups
may be selected at once. If several groups have been selected, several indicator lights
will remain on until the groups are turned off.
BLACK OUT
Turns off everything on the fixture, or selected fixture group.
1. Press <BLACK OUT>.
To turn off this function, press <BLACK OUT> again.
Function
RFC-XL QRG Rev. 1