SOUNDMASTER ELiTEline PL711 Gebrauchsanleitung Seite 14

ANTI - SKATING FORCE ADJUSTMENT
The anti-skating force must be adjusted corresponding to the tracking force as follows:
This turntable includes a built-in amplifier and comes supplied with Hi-Fi speakers.
Connect the speakers using the supplied speaker cable (black cable to black clamp; & red cable
to red clamp) connect the left speaker with left and right speaker with the right outlet clamps.
CONNECTION TO EXTERNAL UNITS WITH CHINCH AUDIO CABLE
If you wish to use your own amplifier or speakers, please follow the instructions below
If you have amplifier with PHONO input pls use the Phono input jack and GROUND connection
and switch to the pre amplifier selector to PHONO.
If you have amplifier or active speakers with LINE INPUT pls switch the pre amplifier selector to
LINE and connect to the LINE input sockets of the amplifier/active speakers
The red cable is for the right channel and the white is for the left channel.
1. Insert the DC plug of the AC adapter cord into the DC INPUT Jack at the back of the
turntable.
2. Plug the AC adapter into a normal power outlet.
NOTE: Do not plug the AC power adapter into a power outlet before all turntable assembly is
completed. Before turning on turntable power, recheck all connections to make sure they are
correct and secure. Always turn off the turntable before connecting or disconnecting from
power.
Tracking Force Groove in the Stick
1. Slip the loop of the anti-skating weight's thread over the
2. Feed the thread through the loop of the wire hanger
CONNECTION TO THE INCLUDED SPEAKERS
This product has a built-in phono equalizer function. You
can use the product even if you do not have a phono
amplifier or connectable equipment with a built-in phono
amplifier.
Use the pre-amplifier selector switch to set the output, as
described below
MAIN POWER CONNECTION
1 - 2 g 1st from the bearing ring
2 - 3 g 2nd from the bearing ring
3 - 4 g 3rd from the bearing ring
>4 g 4th from the bearing ring
3rd groove of the stick to set the correct anti-skating
force for the factory-installed cartridge.
4
PL711 / English Instruction Manual