Removing The Battery; Adjusting Blower For User - Stihl BGA 300.0 Gebrauchsanleitung

8 Adjusting Blower for User

4
1
► Open and hold the lever (5).
► Press the battery (1) against the back plate (2)
until the connector (3) rests against the
socket (4).
► Press the lever (5) down until it engages with
an audible click.
7.2

Removing the Battery

► Place blower on a level surface.
► Open the lever.
► Remove the battery.
8 Adjusting Blower for User
8.1 Fitting and Removing Harness
8.1.1 Fitting and Adjusting the Carrying
Strap
► Put the blower on your back.
► Close buckle (1) on the waist belt.
0458-724-9601-A
3
5
2
5
1
► Tighten the straps until the waist belt fits
snugly on your hips and the back padding is
against your back.
► Thread the end of the waist belt through the
buckle (2).
8.1.2 Removing the Carrying Strap
► Loosen the straps.
► Open the buckle on the waist belt.
► Take the blower off your back.
8.2 Adjusting the Control Handle
1
► Open quick release (1).
► Slide the control handle (2) to the required
position.
► Close quick release (1).
The quick release engages in position with an
audible click.
8.3 Adjusting the Blower Tube
The nozzle can be continuously adjusted
depending on the height of the user and the work
situation.
► Shut off the engine.
1
► Turn union nut (1) a half rotation toward
English
2
2
2
.
23