Initial Operation - MACHEREY-NAGEL NANOCOLOR Advance Kurzanleitung

Initial operation

Step 1: Power supply
Multiple hazards: Only qualified personnel should carry out instructions described in this
step.
Risk of electric shock: Make sure that the power cord is not damaged. Check the
suitability of the power source for the equipment.
Risk of injury due to the danger of tipping over due to slipping. Place the device on a flat
surface. Do not stack the device.
The unit is designed for indoor and outdoor use. Do not expose the device to direct
sunlight. Protect the interfaces from the effects of moisture and dampness when used
outdoors.
Fire hazard: Take care not to overload the mains socket. There is a risk of
overload and fire.
Make sure that the power cord is not damaged. Check that the power source used is
suitable for the equipment.
Risk of injury: Familiarize yourself with the device before working with it and read this
document carefully. Do not use the device unless you have received instruction in its
use.
Defects of the power supply and housing can lead to malfunction of the device. If the
device shows an apparent breakage of the housing or a damaged power supply, it must
be taken out of operation.
Spectrophotometer NANOCOLOR
8
CAUTION
WARNING
CAUTION
NOTICE
WARNING
WARNING
NOTICE
Advance 1.1, 10.2021
®