saimac ASSO 2.2 Betriebsanleitung Und Wartung Seite 15

REPLACING THE HEPA FILTER
REPLACING THE PRE-FILTER
Pull latch "A" in order to unhook the vent
grid; at the same time, slide it (in the di-
rection shown by the arrow) so that it co-
mes free. The pre-lter is housed in the air
pre-lter or clean it, by washing it with wa-
ter; dry it and carefully replace it in its hou-
grid again, by sliding it all the way in until
you hear the latch snapping into place.
A
sso
USING THE POWER BASE
(According to models purchased)
All the models provided with a power
socket for power base (10): attach the
power base to the suction connector
(9) pushing it in well and then connect the
power base plug to the appropriate so-
cket.
When the appliance is turned on, the po-
wer base motor starts automatically (see
power base instruction).
Avoid frequent use of the power base on
particularly dedicate rugs or carpets as over
time the fabric could be damaged.
WARNING: Do not use the power base
on rug fringes as these could become en-
tangled in the roller.
2.2
ENGLISH
STARTING THE POWER BASE
To start operating: push the unhook pedal
downwards / push the cover (according to
the model). The power base will start.
15