Breo iNeck air 2 Bedienungsanleitung Seite 11

EN Operation steps for battery removal:
1 Cut off the external power supply, and remove the product
housing;
2 Disconnect the power supply to the battery;
3 Remove the battery;
4 Place the waste battery at a fixed recycling station;
5 Please observe local environmental protection laws and
waste disposal guidelines and protect the environment.
Notes:
- Remove the battery out of the appliance before scrapping the
appliance;
- The appliance must be disconnected from power supply
before removing the battery;
- The battery should be disposed of safely.
Except professionals, no one shall attempt to
remove the battery!
21
EN Troubleshooting
Please perform the following checks in case of any failure
occurring during operation. If the failure cannot be eliminated
or the product still cannot work ideally, please cut off power
supply and ask a professional technician to repair it. Never
attempt to disassemble the product.
Possible cause
Symptom
Check whether the
Power-on failure
battery level is too low
Low massage Check whether the
intensity battery level is low
If the problem still cannot be solved after troubleshooting,
please call our After-sales Service at 400-830-9700
Basic solution
If yes, please charge the
battery timely
If yes, please charge the
battery timely
22