Cameo AZOR S2 Bedienungsanleitung Seite 17

Display Display Display
settings Reverse
Display
Off Timer
Autolock
Dimmer Dimmer Dimmer
settings Curve
Dimmer
Curve =
dimmer
curve
Dimmer
Response
Dimmer
= dimmer
Response
response
PWM Fre-
PWM Fre-
quency
quency =
LED PWM
frequency
Move- Adjust Pan
ment head Reverse
move-
Tilt
ments
Reverse
Pan Angle 540°
Move in
Black
Silent
Move-
ment
Off
On
Always
On
Off after
20 s
Off
On
Linear
Exponen-
tial
Logarith-
mic
S-curve
LED
Halogen
650 Hz,
1530 Hz,
3600 Hz,
12 kHz,
18.9 kHz,
25 kHz
Off
On
Off
On
630°
Position Off
Feed-
On
back
Off
On
Off
On
No display rotation
Display is rotated by 180° (e.g. for overhead
installation)
On permanently
Deactivates after approximately 20 seconds of
inactivity
Autolock function disabled
Operating elements LOCKED after approx. 30
seconds without input. Unlock: Around Press MENU
for 3 seconds.
Light intensity increases linearly with DMX value
Light intensity can be finely adjusted at lower DMX
values and broadly adjusted at higher DMX values
Light intensity can be broadly adjusted at lower
DMX values and finely adjusted at higher DMX
values
Light intensity can be finely adjusted at lower and
higher DMX values and broadly adjusted at medi-
um DMX values
Lamp responds abruptly to changes in DMX value
The spotlight behaves like a halogen spotlight with
slight brightness changes
Select LED PWM frequency
Does not reverse pan direction
Reverses pan direction
Does not reverse tilt direction
Reverses tilt direction
Pan angle 540°
Pan angle 630°
Automatic position correction is disabled
Automatic position correction is enabled
No blackout during head movement
Blackout during head movement
Function disabled
Slow motor movements for quieter operation
17