Mounting Via The Central Fine Thread - HBM CFT+ Bedienungsanleitung

Mechanical installation
7.3.2

Mounting via the central fine thread

The sensor can be used for quasi-static measurements with this type of
mounting. Dynamic loads are acquired correctly. The sensor must not be ex­
posed to any tensile forces with this type of mounting.
Use the fine thread completely and please be sure to observe the torques
specified in the table.
Sensor
CFT+/25kN
CFT+/50kN
CFT+/70kN
CFT+/120kN
18
Thread
M5x0.5
M9x0.5
M13x0.5
M19x0.5
A05101_01_YCI_02 HBM: public
Flange adapter (customized)
Integrated fine thread
Centering ring (scope of supply)
Flange adapter (customized)
M [Nm]
min
1.9
4
14
35
M [Nm]
max
2.1
5.5
18
45
CFT+