Before Use; Filling With Water - SOLAC CE4480 Gebrauchsanleitung

ENGLISH
USE AND CARE:
Do not use the appliance if its accessories are
•
not properly fitted.
Do not switch the appliance on without water.
•
Do not use the appliance if the on/off switch
•
does not work.
Do not move the appliance while in use.
•
Respect the MAX and MIN levels
•
Disconnect the appliance from the mains when
•
not in use and before undertaking any cleaning
task.
Unplug the appliance from the mains before
•
refilling the water tank.
Store this appliance out of reach of children
•
and/or persons with physical, sensory or re-
duced mental or lack of experience and knowl-
edge.
Do not store the appliance if it is still hot.
•
Only use water with the appliance.
•
The use of bottled mineral water adapted for
•
human consumption is recommended.
Never leave the appliance connected and un-
•
attended if is not in use. This saves energy and
prolongs the life of the appliance.
Do not remove the filter holder when coffee is
•
being made, as at that time it is under pres-
sure.
DESCRIPTION
A Water Tank Lid
B Water tank
C Hot plate for warming cups
D Connection pilot light
E Heating pilot light
F ON/OFF Switch
G Coffee outlet/Water outlet Switch
H Steam heating Switch
I Steamer pipe
J Filter holder
K Measuring spoon
L Ground coffee filter (1 cup)
M Ground coffee filter (2 cups)
N Supply cable
O Drip tray
P Tray grill
R Steam knob
INSTRUCTIONS FOR USE

BEFORE USE:

Make sure that all the product's packaging has
•
been removed.
Before using this product for the first time, it is
•
advisable to test it only with water.
Before using the product for the first time, clean
•
the parts that will come into contact with food in
the manner described in the cleaning section.
Before connecting the machine, check that
•
the buttons (F, G) are not pressed, and steam
control (R) is closed
PRIMING THE CIRCUIT:
This simple operation ensures optimum dis-
•
pensing and must be carried out:
When first starting:
•
When the machine has been out of use for a
•
long time (1 or 2 weeks)
After making steam
•
WHEN THE TANK HAS RUN OUT OF WATER.
Fill the receptacle taking care to observe the
•
MAX level
Connect the appliance to the mains.
•
Press the on/off switch (F) to ON position. The
•
(D) pilot light will come on
You do not have to wait for the machine to heat
•
up for this operation
Without fitting the filter holder (or with the filter
•
holder fitted, but without coffee), place a recip-
ient under the steam pipe (I)
Open the steam knob (R) by turning counter-
•
clockwise
Press the coffee switch / water (G) to ON po-
•
sition
Water will exit through the steam pipe. Wait un-
•
til approximately one cupful has exited
o finish serving, back coffee / water switch to
•
OFF position and close the steam knob (R) by
turning clockwise
This will complete the priming operation.
•

FILLING WITH WATER:

The tank must be filled with water before turn-
•
ing the appliance on.
Remove the water tank.
•
Open the cover.
•
Fill the tank taking care to observe the MAX
•
level (Fig. 1)
Close the lid.
•
EN