Overheating Protection; Cleaning And Care - BRAYER BR2800 Bedienungsanleitung

10 EN
• «Porridge» program operation time «0:40» minutes is
set by default and cannot be adjusted.
• Press the timer button (9) «Timer» «
indicator will light up (5) «
show the digital symbols «0:00», by pressing the
buttons (11) «-/+» you can set the delay time from
«0:00 to 24:00» hours.
Notes:
- in the cooker operating/deactivation time setting
mode press the buttons (11) «-/+» shortly to
decrease or increase the time by 1 minute;
- press and hold the buttons (11) «-/+» shortly to
decrease or increase the time by 10 minutes;
«Voltage» button
• To determine the power consumption during the
cooker operation, press the button (10) «Voltage»
« » once, the indicator (6) «
the display (12) shows the power consumption in
kilowatts per hour (kWh).
• Press the button (5) «Voltage» «
display (9) will show the mains voltage at that
moment.
• To switch the cooker off, press again the «On/Off»
button (14) « », the on indicator (8) «On» «
go out. Wait until the cooling fan stops rotating and
», the light
», the display (12) will
» lights up and
» again, the
» will
disconnect the power plug (3) from the mains socket.
Notes:
- the control buttons are sensory, you just have to
touch it;
- each pressing of the control button is
accompanied with a sound signal;
- after switching the electric cooker off, the cooling
fan will continue to run for some time, do not
disconnect the power plug (3) from the mains after
the cooling fan has stopped spinning.

OVERHEATING PROTECTION

• The cooker is equipped with overheating protection
system. If the empty cookware is heated, the
overheat protection system will activate, you will hear
sound signals, the display (9) will show the «E5»
symbol, and the electric cooker will automatically
switch off.
• If it happens, switch the cooker off and wait until it
cools down before switching it on again.

CLEANING AND CARE

• Switch the cooker off by pressing the button (11)
«On/Off» « », wait until the cooling fan stops
spinning and disconnect the power plug (3) from the
mains.
• Wipe the cooker body surface with a slightly damp