De-Scaling Of The Vaporizer - EOS Bi-O Mat U Montage- Und Gebrauchsanweisungen

De-scaling of the vaporizer

Consult your water company to determine the
hardness level of your water. In areas with hard-
ness level 1 (0-8,4° German hardness levels -
soft water), the system generally works without
special precautions and must be de-scaled only
occasionally when necessary.
Should your water lie within the hardness lev-
els 2-3 (8,4-14° German hardness levels - soft
water), the vaporizer must be de-scaled reg-
ulary (in accordance with the hardness level).
Control the vaporizer on regular basis!
To descale the vaporizer add the de-scaling
liquid (descalers for household appliances are
generally suitable), which is suitable for alumin-
ium, to the water in the vaporizer in accordance
with manufacturer´s instructions. Bring the wa-
ter and de-scaling product mixture to a boil for
about 10 minutes and allow to cool. After cool-
ing, drain the mixture from the vaporizer and
rinse at least twice with clear water. Note also
the instructions given by the de-scaling prod-
uct manufacturer.
ATTENTION!
Please make sure to disconnect the power sup-
ply completely by all servicing and maintenance
works, by replacement of parts and accessories
and by troubleshooting of any operation faults.
EN
30