Led Bulb Replacement; Power Supply Connection; Cleaning And Maintenance; Anti-Grease Filter - GLOBALO HEWENO ISOLA Gebrauchs- Und Montageanleitung

EN
LED BLUB REPLACEMENT
LED plafond replacement only by qualified personnel.

POWER SUPPLY CONNECTION

The supply voltage must correspond to the voltage indicated on the identification plate placed
inside the hood. If the hood is equipped with a plug, insert it in an accessible socket compliant
with the applicable regulations, as it shows is in Fig. 9. If the hood is not equipped with a plug, the
installation should be carried out by a certified specialist (e.g. an electrician).

CLEANING AND MAINTENANCE

Before performing any maintenance operations, unplug the device from the socket. Use mild de-
tergents for cleaning. Do not use abrasive cleaning products. The hood should be cleaned at least
once a month or every 35 hours of operation. DO NOT USE ALCOHOL-BASED CLEANING AGENTS.
Inox parts should be cleaned with special product (e.g. BERNER).

ANTI-GREASE FILTER

The hood is equipped with an aluminium filter which partially traps grease particles. You can
wash the filter manually by immersing it for 15 minutes in 40-50ºC water with dishwashing liquid.
After 15 minutes, wash and rinse the filter thoroughly. Dry well before placing it back in the hood.
You can also wash it in a dishwasher. After cleaning, you may notice a slight discolouration of
the filter, which does not affect its properties. A regularly cleaned filter will help to maintain the
efficiency of the hood and prevent the risk of fire.
35