ThermoUp Dry Bedienungsanleitung Seite 25

Figure 4. Installation of the ThermoUp Dry Double
1
Remove the device from the box.
3
Select a location for the appliance to be mounted
on the wall, following the installation instructions,
and mark it with the supplied stencil. The holes in
the stencil are marked at the bottom of the towel
warmer's packaging box.
5
Secure the towel rails to the wall with the aid of
clips (second part of the fasteners).
INSTALLATION AND CONNECTION OF THE TOWEL DRYER
2
The towel warmer is supplied with wall
brackets to x the appliance to the wall.
Different wall brackets are required for
different walls. Choose wall plugs, screws,
self-tapping screws, etc. that are suitable
for your walls (not included).
4
Drill holes marked on the wall and secure the bases
of the four remote holders.
6
Attach the towel rails to the appliance:
– use a hexagon to attach the rail holder (without the bar)
to the edge of the towel warmer.
– insert one end of the rail bar into one towel rail holder and
at the other end into the other towel rail holder.
– attach the second holder to the edge of the towel warmer.
220
25