Astralpool PISCINE LAGHETTO POP 100 Montageanleitung Seite 45

11. Place the Laghetto foot blocks H (standard feature for POP Pools).
12. Check that all "V" poles D are completely inserted into the border and keep
doing it while the pool is filling with water.
13. Start filling up the pool and when there are 3-5 cm. of water covering the floor
you will be able to gently pull out any remaining creases, by pulling on
the webbing straps of the pool supports.
14. Complete the filling of the pool until the water has reached at least the middle
of the inside white border.
WARNING: When the pool is full it is not possible to pull the webbing straps of
the supports to remove any creases in the bottom or move the legs if they are
in the wrong position; the strain would damage the straps (remember always the
huge weight of the water). In this case you must always empty out the pool first
to make any adjustments.
45