Using The Air Purifier; Understanding The Air Quality Light; Turning On And Off - Philips AC2889 Benutzerhandbuch

4 Using the air
purifier
Understanding the air
quality light
Indoor Allergen Index (IAI) is a
real-time numerical display that provides
visual and immediate feedback on
indoor allergen level.
IAI Air quality light
color
1-3 Blue
4-6 Blue-violet
7-9 Red-purple
10-12 Red
The air quality light automatically goes
on when the air purifier is switched on,
and lights up all colors in sequence.
After approximately 30 seconds, the
air quality sensors select the color that
corresponds to the surrounding air
quality of airborne particles.
8 EN

Turning on and off

• Always place the air purifier on a
• For optimum purification
• Keep curtains away from the air
1
Air quality
level
2
Good
Fair
Poor
Very poor
3
• If the air purifier stays connected
Note
stable, horizontal, and level surface
with the front of the unit facing
away from walls or furniture.
performance, close doors and
windows.
inlet or air outlet.
Put the plug of the air purifier in the
wall outlet.
Touch to switch on the air purifier
(fig.j).
» The air purifier beeps.
» The air purifier operates under
the allergen mode by default.
» When the air purifier is warming
up, " " displays on the
screen. After measuring the
particulate matter only in the
air, the air purifier shows the IAI
level and operates in the auto
mode with displayed on the
screen (fig.k).
» After measuring the air
quality for approximately
30 seconds, the air quality
sensor automatically selects
the appropriate air quality light
color.
Touch and hold for 3 seconds to
switch off the air purifier.
Note
to the electrical outlet after turning
OFF, the air purifier will operate
under the previous settings when
turned ON again.