Performing Initial Setup - Sonoro ELITE SO-911 Bedienungsanleitung

3. Screw the Wi-Fi antenna onto the WiFi antenna connector located on the back
of ELITE. Lift Wi-Fi antenna upwards.
3.5

Performing initial setup

When ELITE is powered on for the first time, the "Language" (to be used in the
display) selection shows on the display. Afterwards, the Privacy policy statement
appears and needs to be accepted by pressing (OK) on remote control or
navigation knob. Then, the "Setup wizard" appears on the display. Follow the
instructions below to configure some initial settings.
1. When the "Setup Wizard" is displayed, press
(or rotate the navigation knob) to select "YES" and then press OK to start the
setup.
2. You are then prompted to select:
• Time format (12 or 24-hour),
• Source of time & date auto update (Update from Radio, Internet or no update).
70
or on the remote control
© sonoro audio GmbH 2022