Repetitive Dispensing - BRAND HandyStep S Gebrauchsanleitung

4 Operation
b.
c.

4.4 Repetitive dispensing

b.
Operating manual
44
b.
Immerse the head of the PD-Tip verti-
cally into the liquid 3 - 10 mm.
c.
Slowly pull the locking/filling lever up
to the upper stop to prevent the for-
mation of air bubbles.
Small air bubble near the piston can be
ignored since a locking mechanism pre-
vents the residual volume from being
dispensed inadvertently after the final
dispensing step.
The first dispensing step must be dis-
carded!
a.
Check the volume setting once again.
(Compare with the settings in the vol-
ume table!)
b.
Wipe off any liquid sticking to the
head of the PD-Tip with a lint-free
pulp cloth.
c.
Place the head of the PD-Tip against
the vessel wall.
NOTICE
NOTICE
997463