Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
READ THE WARNINGS AND MANUAL CAREFULLY BEFORE USING THE PRODUCT!
INSTALLATION AND MAINTENANCE
The sauna stove is designed for the heating of a sauna room to bathing temperature. It is not to be
used for any other purpose!
WARNING! It is absolutely necessary to install the heater according to values stated in the instruc-
tions of installation and use. Neglecting them causes a risk of fire.
WARNING! Before installing the stove make sure that all safety distance requirements are
EN
fulfilled. There shall be no electrical devices, wires or inflammable materials within the established
safe-ty distances around the stove.
WARNING! Verify the safety distances required for the chimney and accessories from the product's
installation instructions!
•
NOTE! Before actual use, a wood-burning stove must be heated in a particular way as explained below.
The purpose of the first heating procedure is to burn off the protective paint on the wood-burning
stove. As this results in a lot of smoke, do it outdoors! Once the stove has cooled down, remove any
residual paint mechanically e.g. with a wire brush and a vacuum cleaner.
•
All local regulations, including those referring to national and European standards need to be complied with
when installing the appliance.
•
The local fire authorities in charge of approving the installations can provide more detailed information about
fire safety regulations.
•
The device must be installed in such a way that the warning texts are easy to read after installation.
•
The stove shall be installed on a floor with an adequate load-bearing capacity. If the existing floor does not
meet this prerequisite, suitable measures (e.g. load distributing plate) shall be taken to achieve it.
•
Light-coloured floor materials will become dirty from the ash, particles of stone and metal flakes that fall from
the stove. Use floor coverings made of dark materials and dark joint grouts.
•
Before installation, ensure unimpeded access for cleaning the stove and sweeping the chimney.
•
The stove is not suitable for installation in a shared flue system.
•
Arrange for adequate ventilation in the sauna room by ensuring that the intake or exhaust air openings cannot
be blocked accidentally.
•
If a guardrail is made around the heater, the safety distances specified in the instructions of installation and
use manual must be observed.
•
If suitable accessories are installed in the device, follow the accessory-specific operating and installation
instructions!
•
The adjustable feet could scratch the floor surface if the stove is moved on the floor.
•
Do not push the flue connection pipe too far into the flue, as the flue may become blocked.
•
Seal the flue connection pipe to the opening in the fireproof wall with e.g. fireproof mineral wool.
•
Use protective gloves when piling the stones.
•
Rinse any stone dust off the stones before placing them in the heater.
•
Ceramic 'stones' and soft soapstone are not allowed.
•
Do not drop stones in to the stone space.
•
Do not stack the stones too tightly to allow air to circulate between them.
10
WARNINGS AND NOTES
Werbung
Inhaltsverzeichnis
Fehlerbehebung
